Minn Kota Trolling Motors for Your Fishing Boat

Minn Kota trolling motors are designed for all kinds of boating environments and are manufactured for both freshwater boats and those taking to the open sea.

For freshwater boats Minn Kota trolling motors offer intuitive controls, advanced technologies and renowned durability in saltwater conditions. They are manufactured with advanced corrosion protection and fully-encapsulated electronics.

The key to getting the right Minn Kota trolling motor is deciding where on the boat the motor is going to be mounted. Minn Kota trolling motors for the bow of the boat have a wide range of control options and are attached with a bolt on bracket. According to the manufacturer, they are designed to pull the boat through the water for better manoeuvrability and control.

Minn Kita trolling motors for the stern of the boat are fixed with a clamp-on bracket and feature and hand tiller control. They are described as being ideal for smaller boats, dinghies and canoes.

The next key decision to make is how powerful you need your Minn Kota trolling motor to be. The manufacturer explains that the weight of the boat is important when working out how much thrust is needed and the general rule is at least two pounds of thrust for every 100 pounds of full loaded boat weight, including people and fishing gear. If things like current or wind are going to be an issue, then extra thrust might be needed.

Choosing the right shaft length is also important, as if it is too short the prop will not be sufficiently submerged. Sellers of Minn Kota trolling motors and the manufacturer recommend that the center of the motor section is submerged by at least 12 inches.

There are three types of Minn Kota trolling motors to choose from; electric steer motors, cable steer motors and hand control motors. Electric steer motors come with positioning technology which allows you to spend less time worrying about where the boat is and more time fishing.

Cable steer motors have a cable as the direct link between the throttle and the motor. These are described as being good for shallow water conditions as they provide protection from weeds and stumps. While hand control motors have a tiller handle which combines traditional steering with technology to give more precise control.

Minn Kota Terraova 80

The Minn Kota Terrova 80 is a bow-mounted trolling motor with easy to use i-Pilot remote technology that is Bluetooth enabled and it comes with a lift-assist design to raise it up and down, making stowing or deploying possible with just one hand.

It has new foot pedal control for controlling speed and steering and a digital maximize, which the manufacturer says gives up to five times longer run time from one charge while the push-to-test battery meter gives an instant reading of the battery’s charge level.

Its functions include the reinvented Spot-Lock with enhanced hardware and software algorithms for better position-holding accuracy and the advanced Auto Pilot keeps the boat on a heading, so you can fish without having to constantly steer. Cruise control allows the trolling speed to be set at increments of 0.1 mph.

The foot pedal also has a Spot-Lock button for stationary, anchor-free fishing and this Minn Kota trolling motor comes with an 18-foot cord and in shaft lengths of 45 inches, 60 inches and 72 inches. The 24-volt motor delivers up to 80 lbs of thrust.

Shop for a Minn Kota Terrova 80 here

Minn Kota Endura C2 45

The Endura C2 45 is a freshwater, rear-mounted Minn Kota trolling motor with a telescoping handle and comes with a shaft length of 30 inches, 36 inches and 42 inches. It also features a digital maximize.

It is described as a ‘legendary’ performer that will deliver years of use on the water as it has been built to last. It has a 12-volt motor with five forward speeds and three reverse speeds, providing anglers with impressive control.

This model also features Minn Kota’s signature cool, quiet power which aims to cut down on fish spooking noise. This trolling motor has a six-inch telescoping handle and a tilt twist tiller for comfortable and easy steering. The lever lock bracket offers a rock solid mount.

The Endura’s composite shaft is literally indestructible, according to the manufacturer, and is guaranteed not to break, kink, or corrode for life and it is made from special composite materials that resist flexing, warping and UV light damage. Of all the Minn Kota trolling motors,  this is the only one that comes standard with a lifetime guarantee.

Shop for a Minn Kota Endura C2 45 here

Minn Kota Riptide T/112

For saltwater skippers, the Minn Kota Riptide T/112 comes with rugged protection for tougher conditions and protection from corrosive elements. It is described as having an intuitive, easy-to-use design and quiet motor.

This model has a push-to-test battery meter and delivers up to 112 lbs of power and comes with precision manoeuvrability as well as a digital maximizer on most models.

Minn Kota describes it as having an indestructible composite shaft and transom brackets for mounting. Indeed, the rugged 10-position lever lock bracket provides a rock solid mount, with a quick release lever lock and durable reinforced composite materials.

There is a special tilt and extend tiller which moves up to 45 degrees for maximum control and it can also tilt downward for easy storage. This works by drawing power at variable speeds to allow for longer fishing times.

Shop for a Minn Kota Riptide T/112 here

Minn Kota Edge

The Minn Kota Edge 12-volt trolling motor is described as having a rugged, dependable construction and comes with a latch and door mounting system for easy removal of the motor for security and storage.

It aims to cope with tough freshwater conditions, including treacherous stump fields, tangled weed beds, or punishing wind and waves and has an updated motor mount with an extruded upper arm made from marine grade anodized aluminium that is built for years of trouble-free use.

This trolling motor has been designed with an ultra-responsive foot pedal that is said to be easier to operate with more room for your foot and exact speed control, while the five speed motor has forward, reverse, and multiple speed settings.

The technical details show that pound for pound, this motor’s composite shaft is stronger than steel. It flexes on impact and won’t break, kink, or corrode.

When it comes to distracting noise, the engine is described as one of the quietest of all the Minn Kota trolling motors and has extra large windings and commutators to dissipate heat, resulting in a cooler running operation, extended battery power, and longer motor life. And the unique bearing system reduces friction to cut fish-spooking noise.

The battery system allows the temperature and state of charge to be monitored so that it can deliver a faster, more regulated precise charge so you can stay on the water longer without worrying about battery length and power. It also has a multi-stage charging and automatic temperature compensation for more precise charges that won’t damage the battery. It shuts down when charging is complete, thus extending the battery life.

If you want to take to the seas, this Minn Kota trolling motor is also saltwater tested and fully corrosion resistant.

Shop for a Minn Kota Edge here

We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.